COMPANY NAME:         Dial Manufacturing, Inc.

                                    25 S. 51st Avenue

                                    Phoenix, Arizona  85043

                                    Tel. No.: (602) 278-1100

NFPA Hazard Class:

Health Hazard:          0          0 = Least

Flammability:            1          1 = Slight

Reactivity:                0          2 = Moderate

Other:                                  3 = High

PRODUCT NAME:         ZOOM SPOUT OILER

Synonyms:              Turbine Oil

Generic Name:        Industrial Oil

PRODUCT NUMBER:        Dial        5713

Ingredient/CAS Number

CAS #64742-65-0

Oil Mist, if generated

TLV

5.00

Units

MG/M3

Agency

OSHA

Type

Full Term TWA

Eye Contact:

For direct contact, flush the affected eye(s) with clean water.  If irritation or redness develops, seek medical attention.

Skin Contact:

Do not use gasolines, thinners or solvents to remove product from skin.  Wipe material from skin and remove contaminated clothing.  Cleanse affected area(s) thoroughly by washing with soap and water and, if necessary, a waterless skin cleanser.  If irritation or redness develops and persists, seek medical attention.

Inhalation (Breathing):

If irritation of nose or throat develops, move away from source of exposure and into fresh air.  If irritation persists, seek medical attention.  If victim is not breathing or if breathing difficulties develop, artificial respiration or oxygen should be administered by qualified personnel.  Seek immediate medical attention.

Ingestion (Swallowing):

If victim is conscious and alert, give 2 to 3 cups of milk or water to drink.  Seek medical attention.  To Physician:  Emesis or lavage is not recommended for ingestions of minute quantities or tastes of most hydrocarbons.  Medical opinion is divided for larger ingestions.  Emesis or lavage has been recommended for those petroleum products which have a high oral toxicity.  Gastric lavage with a cuffed endotracheal tube is recommended by some physicians to prevent aspiration.

Eye Contact:

This material may cause eye irritation.  Direct contact may cause burning, tearing and redness.

Skin Contact:

This material may cause skin irritation.  Prolonged or repeated contact may cause redness, burning and dermatitis.

Inhalation (Breathing):

Exposure to mists, or prolonged or repeated exposure to fumes or vapors that may be generated when this material is heated, may cause irritation of nose and throat.

Ingestion (Swallowing):

Accidental ingestion of this material may cause irritation of the digestive tract.

Ventilation:

If current ventilation practices are not adequate in maintaining airborne concentrations below the established exposure limits (see Section I), additional ventilation or exhaust systems may be required.

Respiratory Protection:

If airborne concentrations exceed recommended exposure limits, a suitable filter-type respirator should be worn (see Section I).

Protective Gloves:

The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation.

Eye Protection:

Approved eye protection to safeguard against potential eye contact, irritation or injury is recommended.

Other Protective Equipment:

It is suggested that a source of clean water be available in work area for flushing eyes and skin.  Barrier creams that are specific for oil-based materials are recommended when gloves are impractical.

Stability:

Stable

Conditions to Avoid (Stability):

Avoid contact with any source of ignition.

Incompatibility (Materials to Avoid):

Avoid contact with strong oxidizing agents.  Extended exposure to high temperatures may cause decomposition.

Hazardous Decomposition Products:

Thermal decomposition in the presence of air may yield amounts of oxides of carbon and minor amounts of oxides of sulphur and nitrogen.

Hazardous Polymerization:

Will not occur.

Precautions in Case of Release or Spill:

Collect leaking liquid in sealable containers.  Absorb spilled liquid in sand or inert absorbent.  Contact fire authorities and appropriate State/Local agencies.  If spill of any amount is made into or upon U.S. navigable waters, the contiguous zone, or adjoining shorelines, notify Coast Guard National Response Center (phone number 800-424-8802).

Waste Disposal Method:

Dispose of produce in accordance with Local, County, State and Federal regulations.

Handling and Storage Precautions:

Store in a cool, dry location.  Keep away from incompatible materials (See Section V).  Avoid generating oil mist while handling.  Avoid prolonged or repeated skin contact.  Wash thoroughly after handling.  Do not wear oil-soaked clothing or shoes.

DOT Flammability Classification:  Not Regulated

Flash Point:       388, COC F

                        188C

Extinguishing Media:

Extinguish with dry chemical, CO², water spray, foam, sand or earth.  Water and foam may cause frothing.

Fire & Explosion Hazards:

This material will burn, but will not ignite readily.

Fire Fighting Procedures:

Water spray may be useful in minimizing vapors and cooling containers exposed to heat and flame.  Avoid spreading burning liquid with water used for cooling purposes.  Move undamaged containers from fire area if you can do so without risk.

Approx. Boiling Range

Above 600 F

(316) C

% Solubility in Water

Negligible

Vapor Density

Heavier than Air

Specific Gravity

0.88

Evaporation Rate

Slower then Ether

Appearance

Clear, Yellow

% Volatile

Negligible

Odor

Characteristic

D.O.T.:

Not Regulated

Shipping Name:

Not Applicable

ID Number:

None

ISSUE DATE:  JANUARY 1, 1987

Disclaimer of Expressed and Implied Warranties

The information in this document is believed to be correct as of the date issued.

However, no warranty of merchantability, fitness for any particular purpose, or any other warranty is expressed or is to be implied regarding the accuracy or completeness of this information, the results to be obtained from the use of this information or the product, the safety of this product, or the hazards related to its use.

This information and product are furnished on the condition that the person receiving them shall make his own determination as to the suitability of the product for his particular purpose and on the condition that he assumes the risk of use thereof.